BJM KZN220, 201335, 30HP, 460V, Heavy Duty Slurry Pump

• EVERY KZN slurry pump is constructed with the following abrasive resistant 28% chrome iron (600 Brinell, 57 Rockwell C) components;
• Agitator - to fluidize settled solids into a slurry.
• Wear plate - replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
• Semi- open Impeller - to handle abrasive solid concentrations as high as 70% by weight.
• EVERY KZN slurry pump model is protected by;
• Class H motor insulation - and built in amperage ( FLA ) and temperature overload protection.
• Double silicon carbide mechanical seals - in a separate oil filled seal chamber.
• Heavy Duty Lip Seal - additional protection for the mechanical seals. Stainless steel shaft and shaft sleeve - saves on shaft wear due to abrasives and corrosion.
• Pump volutes cast from hardened Ductile Iron - 300 Brinnell hardness; twice as abrasive resistant as standard ductile iron.
• EVERY KZN is a top discharge pump;
• KZN heavy duty slurry pumps are utility pumps; frequently dragged from one site to another. The KZN doesn't have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
• Top discharge pumps are cooled by pumped liquid - The KZN slurry pumps can pump a sump or pit down to within "inches" of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
• Top discharge means "SLIM" - even the largest model with a 22.75 inch "waistline" will fit down a manhole with a hose attached.
• The KZN's hardened ductile iron volutes - cast with extra thick walls at the point where pumped slurry enters the discharge.
• High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging. Details:
GENERAL DATA
• MAX. FLOW: GPM 1268
• MAX. HEAD: ft 105′
• PUMP TYPE Slurry
• STRAINER OPENING 1.375″
• DISCHARGE SIZE 6″ NPT-M (8″ flange optional)
• DISCHARGE CONNECTION 6″ or 8″ Hose Barb Optional
• MAX. SUBMERGED DEPTH 200′
• SHIPPING WEIGHT:lbs 1275
• CONSTRUCTION/MATERIAL DATA
• MOTOR CASING Cast Iron
• PUMP VOLUTE Ductile Iron
• IMPELLER - MULTI VANE Hi-Chrome
• LIP SEALS & O-RINGS Buna - N
• ROTOR SHAFT 410 SS
• EXTERNAL HARDWARE 304 SS
• QTY. OIL IN SEAL CHAMBER 213 U.S. FL. OZ.
• ELECTRICAL/MOTOR DATA
• MOTOR RATING: HP 30
• MOTOR RPM 1750
• MOTOR INSULATION CLASS H
• MOTOR SERVICE FACTOR 1.15
• VOLTAGE 460, 3ph-60Hz
• CURRENT F.L.A. 39
• MOTOR PROTECTION Thermal & Amp Overload
• POWER CORD: GAGE; LENGTH A.W.G. 4/5; 50′, SOOW
• MAXIMUM LIQUID TEMPERATURE 104° F
• Seal Minder® Optional

Our goal is to help you save money and peace of mind on your IT environment. We strive to achieve this goal by having our on-staff engineers assess your current environment (networking, server, and storage) and your performance requirements. We then leverage your current hardware where possible and save money on upgrades by blending new and refurbished hardware.
All equipment is sold with a minimum 30 day warranty or otherwise stated in listing.
ESX has a No Risk Guarantee on all equipment we sell and we offer extended maintenance from 1 - 5 years from hardware only to full management of your IT environment.

Payment

We accept Paypal as payment method.

Shipping

Products will ship within 1 business day of receiving cleared payment.
Ships in One Business Day.

Returns

Returns are accepted.
Items must be returned within 30 days.
Seller will pay for return shipping.

Feedback

Customer satisfaction is important to us. We value your feedback.
If there is any issue with your order, contact us immediately. We guarantee that your issue will be solved.